A guide from Pure Mechanical GroupWritten by a Red Seal plumber in British Columbia

Metro Vancouver · Vancouver · Updated November 2026

Water heater installation in Vancouver.

Vancouver is the one city in the region with its own rule about what you may install, and it starts on January 1, 2027.

Typical prices in Vancouver

JobTypical priceNotes
Storage tank, installedReplacing a tank with a tank$2,489 to $3,589+Supplied and installed, with the permit and removal of the old tank. What moves the price
Tankless, replacing a tank$8,789 to $11,989+More where the vent or gas line has a long run. Tankless cost
Heat pump water heaterPriced on siteDepends on the wiring and the space. Heat pump cost
Repair instead$429 to $959+Repair or replace

Typical prices across Metro Vancouver and the Fraser Valley from the Unclog.it price guide, before tax. They are a guide and a job can run higher. Your price is set on site, in a written estimate, before any work starts.

Who issues the permits in Vancouver

GasThe City of Vancouver issues gas permits here, not Technical Safety BC. Its permits cover natural gas on an ordinary house meter. Propane, and gas supplied at higher pressure, stay with Technical Safety BC. The City's fee schedule has its own line for a replacement water heater.
PlumbingThe City of Vancouver issues plumbing permits, and asks for one to install, change or upgrade any part of a plumbing system. It lists replacing an existing electric hot water tank among the jobs that need no permit.
ElectricalThe City of Vancouver issues electrical permits here, not Technical Safety BC. One is needed when wiring changes: a new circuit for an electric or heat pump water heater, for example.

A licensed contractor takes out the permits for you. Doing the work yourself under a homeowner permit is allowed only in a detached house that you own and live in, with no suite. Whoever does it, ask for the permit or decal number and keep it with the invoice. Permits and code in B.C.

What we see in Vancouver homes

Older houses in East Vancouver, Kitsilano and MarpoleMany of these houses vent a gas tank up a masonry chimney it once shared with the furnace. If the furnace has since been replaced with a high-efficiency model, the tank is alone on a chimney sized for two appliances. We check the draft before recommending a like-for-like tank, because a liner changes the price.
Houses with suites and laneway homesA house with a suite, occupied or not, is outside the homeowner permit: Technical Safety BC requires a licensed contractor. One tank feeding two households is also the usual reason people run out of hot water, so we size for both kitchens and both showers. A laneway house usually has its own small heater in a tight mechanical closet, so the replacement is chosen by what fits.
Condos and apartments, Downtown and the West EndA suite with its own heater usually has an electric tank in a closet. The job is about fit, a drained pan under the tank, and booking the water shut-off with the building. A licensed contractor is required in any strata. Condos, apartments and townhouses are exempt from the 2027 rule.

The water in Vancouver

Vancouver's water comes from Metro Vancouver's mountain reservoirs and is very soft: about 17 mg/L of hardness in the region's 2021 testing, where anything under 60 counts as soft. Scale builds slowly, so a tankless heater's yearly flush is quick work. It still has to be done.

The 2027 rule

From January 1, 2027, a replacement water heater in a Vancouver house or duplex must be at least 100% efficient. In practice that means electric or heat pump. A like-for-like gas tank or gas tankless heater will no longer comply.

Townhouses, multiplex homes, apartments and condominiums are exempt, and homes with electrical or space constraints may qualify for an exception. If your gas tank is getting old, you have until the end of 2026 to replace it with gas if that is what you want. The rule, explained.

Vancouver's plumbing by-law also sets a minimum storage temperature of 60°C for hot water, which is why a mixing valve belongs on the heater.

Where we work in Vancouver

Pure Mechanical Group Ltd. installs and replaces tank, tankless and heat pump water heaters across Vancouver. Other cities we serve.

Questions

Do I need a permit to replace a water heater in Vancouver?

For a gas water heater, yes. The gas permit comes from the City of Vancouver. The City of Vancouver issues plumbing permits, and asks for one to install, change or upgrade any part of a plumbing system. It lists replacing an existing electric hot water tank among the jobs that need no permit. An electrical permit, from the City of Vancouver, is needed when the wiring changes.

How much does water heater installation cost in Vancouver?

Replacing a storage tank with a storage tank is typically $2,489 to $3,589, supplied and installed. Replacing a tank with a gas tankless heater is typically $8,789 to $11,989. These are typical prices across Metro Vancouver and the Fraser Valley, before tax, and the price for your home is set on site in a written estimate.

Can I still install a gas water heater in Vancouver?

Until December 31, 2026, yes. From January 1, 2027, a replacement water heater in a Vancouver house or duplex must be at least 100% efficient, which a conventional gas tank or gas tankless heater is not. Townhouses, apartments and condominiums are exempt.

Sources

More water heater help

This page is general information, not professional advice for your home. Gas, electrical and plumbing work is regulated in British Columbia. If you are unsure at any point, stop and call a licensed contractor. See the legal disclaimer.