Metro Vancouver · Burnaby · Updated November 2026
Water heater installation in Burnaby.
Burnaby is one of the few cities that issues all three permits itself: plumbing, gas and electrical come from City Hall, not from Technical Safety BC.
By Andrew HendersonRed Seal Plumber
Typical prices in Burnaby
| Job | Typical price | Notes |
|---|---|---|
| Storage tank, installedReplacing a tank with a tank | $2,489 to $3,589+ | Supplied and installed, with the permit and removal of the old tank. What moves the price |
| Tankless, replacing a tank | $8,789 to $11,989+ | More where the vent or gas line has a long run. Tankless cost |
| Heat pump water heater | Priced on site | Depends on the wiring and the space. Heat pump cost |
| Repair instead | $429 to $959+ | Repair or replace |
Typical prices across Metro Vancouver and the Fraser Valley from the Unclog.it price guide, before tax. They are a guide and a job can run higher. Your price is set on site, in a written estimate, before any work starts.
Who issues the permits in Burnaby
| Gas | The City of Burnaby issues gas permits here, not Technical Safety BC. Its permits cover natural gas on an ordinary house meter. Propane, and gas supplied at higher pressure, stay with Technical Safety BC. |
|---|---|
| Plumbing | The City of Burnaby issues plumbing permits, and asks for one to install, change or upgrade any part of a plumbing system in a house or duplex. It also publishes its own guide to hot water heaters. |
| Electrical | The City of Burnaby issues electrical permits here, not Technical Safety BC. One is needed when wiring changes: a new circuit for an electric or heat pump water heater, for example. |
A licensed contractor takes out the permits for you. Doing the work yourself under a homeowner permit is allowed only in a detached house that you own and live in, with no suite. Whoever does it, ask for the permit or decal number and keep it with the invoice. Permits and code in B.C.
What we see in Burnaby homes
| Houses from the 1950s, 60s and 70s | A lot of Burnaby was built in these decades. Many of these houses vent a gas tank up a masonry chimney it once shared with the furnace. If the furnace has since been replaced with a high-efficiency model, the tank is alone on a chimney sized for two appliances. We check the draft before recommending a like-for-like tank, because a liner changes the price. |
|---|---|
| Towers around Metrotown and Brentwood | A suite with its own heater usually has an electric tank in a closet. The job is about fit, a drained pan under the tank, and booking the water shut-off with the building. A licensed contractor is required in any strata. |
| Houses with suites | A house with a suite, occupied or not, is outside the homeowner permit: Technical Safety BC requires a licensed contractor. One tank feeding two households is also the usual reason people run out of hot water, so we size for both kitchens and both showers. |
The water in Burnaby
Burnaby's water comes from Metro Vancouver's mountain reservoirs and is very soft: about 17 mg/L of hardness in the region's 2021 testing, where anything under 60 counts as soft. Scale builds slowly, so a tankless heater's yearly flush is quick work. It still has to be done.
Does Vancouver's 2027 rule apply in Burnaby?
No. The rule that replacement water heaters must be electric or heat pump from January 1, 2027 applies only inside the City of Vancouver. In Burnaby you can still replace a gas water heater with a gas water heater. Gas or electric.
Where we work in Burnaby
- Metrotown
- Brentwood
- Edmonds
- Burnaby Heights and Capitol Hill
Pure Mechanical Group Ltd. installs and replaces tank, tankless and heat pump water heaters across Burnaby. Other cities we serve.
Questions
Do I need a permit to replace a water heater in Burnaby?
For a gas water heater, yes. The gas permit comes from the City of Burnaby. The City of Burnaby issues plumbing permits, and asks for one to install, change or upgrade any part of a plumbing system in a house or duplex. It also publishes its own guide to hot water heaters. An electrical permit, from the City of Burnaby, is needed when the wiring changes.
How much does water heater installation cost in Burnaby?
Replacing a storage tank with a storage tank is typically $2,489 to $3,589, supplied and installed. Replacing a tank with a gas tankless heater is typically $8,789 to $11,989. These are typical prices across Metro Vancouver and the Fraser Valley, before tax, and the price for your home is set on site in a written estimate.
Does Vancouver's 2027 water heater rule apply in Burnaby?
No. It applies only inside the City of Vancouver. In Burnaby a gas water heater can still be replaced with a gas water heater.
Sources
- Unclog.it price guide: Water heater installation
- Unclog.it price guide: Water heater repair
- Technical Safety BC: Our jurisdiction, and the local governments that issue their own permits
- Technical Safety BC: Making gas or electrical changes to your home
- Technical Safety BC: Directive D-GA 2012-01, Replacement appliance permit decals
- City of Burnaby: Residential trade permits
- Metro Vancouver: Physical and chemical analysis of water supply, 2021 (PDF)
More water heater help
This page is general information, not professional advice for your home. Gas, electrical and plumbing work is regulated in British Columbia. If you are unsure at any point, stop and call a licensed contractor. See the legal disclaimer.